Remote Isolation

Mehta Tech provides several different Remote Isolation Solutions. Having the ability to remotely isolate current and or voltage is critical for worker and equipment safety. Our Remote Isolation solutions can isolate current or voltage and can be either imbedded into the electronics or as a stand-alone self contained modules with FT1 Type disconnect switches. 

Remote Isolation Options

Mobirise Website Builder
Single Phase TRANSIG

The 9699 model is a rail mounted current transformer with two terminals for the transformer secondary, and ground lugs for chassis ground. Wiring connections for the transformer secondary outputs are to compression type terminal blocks. This Transig is to be used with DFR Low Current Analog Input Isolation modules (Current/Potential TTMs) PN 9643 or PN 9486 

Mobirise Website Builder
3-Phase TRANSIG

The 9701 model is a plate mounted 3-phase current transformer with six terminals for the transformer secondary, and ground lug for chassis ground. Wiring connections for the transformer secondary outputs are to compression type terminal blocks. This Transig is to be used with DFR Low Current Analog Input Isolation modules (Current/Potential TTMs) PN 9643 or PN 9486. 

Mobirise Website Builder
Split Core CT

The Split-Core Current Transformer interfaces with the analog isolation P.N 9643 and 9818. It is designed for indoor use only and to be used as an auxiliary CT. Breaking the CT circuit is not necessary when deploying the Split-Core CT.

Mobirise Website Builder
Remote Isolation Module w/ Test Switches

The 9766 model is a self-contained cabinet mounted isolation module that can be installed into any standard 19” (24” w/adapter) equipment cabinet. The standard configuration is 4RU in height. All wiring connections are barrier type terminal blocks.

208 N. 12th Ave. Eldridge, IA, 20748 USA
© Copyright 2023 Mehta Tech, Inc. All Rights Reserved.

Made with ‌

Offline Website Builder